Implant Design The Skeletal Dynamics Humeral Plating Set consists of the following systems: Distal Humerus Plating System Midshaft Humerus Plating System The Skeletal Dynamics Humeral Fixation Set contains bone plates for the repair of distal and midshaft humerus fractures. Included in the set are bone screws, K-Wires, and specialized instrumentation. Indications The Skeletal Dynamics Distal Humerus Plating System is indicated for the fixation of fractures, osteotomies, and nonunion of the distal humerus. The Skeletal Dynamics Midshaft Humerus Plating System is indicated for fixation of fractures, peri-prosthetic fractures, nonunion, and malunions in the humeral shaft of adult patients including those with osteopenic bone. Approaches Use trajectory guide to place k-wire through the most distal holes of the medial and lateral plate. Drill through both plates with the 3.7mm cannulated drill. Overdrill with the 4.0mm stop drill. Use the insertion tool and T-10 driver (not pictured) to insert the female component through the plate. Introduce male component using T-10 driver. Thread the male component into the female and continue advancing until the desired compression is achieved. Technical specifications Lateral Capitellar: 70mm, 100mm, 130mm, 160mm Lateral Direct: 85mm, 115mm Lateral Helical: 85mm, 115mm, 145mm, 175mm Medial Direct: 75mm, 105mm, 135mm, 165mm Screws Metaphyseal and Diaphyseal Specific Screw Options Screw Options TiBeam® Male (40mm - 80mm construct lengths) Female (40mm - 80mm construct lengths) Distal Trochlea Compression 20mm - 80mm lengths Compression/ Locking Screw 2.7mm & 3.5mm Compression (10mm - 70mm lengths) 2.7mm & 3.5mm Locking (10mm - 70mm lengths) 3.0mm Polyaxial Locking (10mm - 70mm lengths) FREEFIX® Compression/ Locking 3.5mm Compression (14mm - 44mm lengths) 3.5mm Locking (14mm - 44mm lengths)